These devices are intended for single phase 120 to 480 VAC or 5 to 240 VDC circuit applications at locations feeding sensitive/critical equipment. They are unique in that they are designed as a stand-alone surge suppression device and require no special enclosure when used outside an existing enclosure or cabinet. Their compact size make installation a breeze and the warranty is the best in the industry. Now add to all that, dedicated “all mode” protection, and you get a device that defines effective and reliable surge suppression.
Units are available with our Frequency Attenuation Network™ or simply the encapsulated Optimal Response Network.
SPT Series – Enhanced SineWave Tracking™ – AC units.
SPT-RJ Series – Enhanced SineWave Tracking™ – AC units with RJ14 protection included.
SPT-DIN Series – Enhanced SineWave Tracking™ – AC units with DIN rail mounting.
SPT-DC series – Enhanced SineWave Tracking™ – DC units.
SPW Series – Hardwired Enhanced SineWave Tracking™ – AC units from 120 to 480Vac
FSPT Series – Optimal Response Network – AC units.
ST-PIU2 / ST-SPIU2
ST-PIU6C / ST-SPIU6C
ST-LL240P- 240 Volt, 3 Wire, Parallel unit, With or W/O Frequency Attenuation.
SPT Series
FSPT Series
ST-ICPS – Enhanced Sinewave Tracking (when space is critical and limited.
ST-RSE-3N series These are Three (3) phase units in the same enclosure as the SPT units
ST-FDINxx-20 – 35 mm Din Rail enclosure unit. 120 or 240 single phase – thermal/current fused! Standard clamping performance